Review of the Neoclima Alaska 2.0 NEW air conditioner - heating at -30 ° С
It has long been no secret that the air conditioner is able not only to cool the room, but also to heat it, moreover, it is no worse than a special heating device.
Earlier, in the article "List of TOP 5 Neoclima inverter air conditioners" , we reviewed the best inverter air conditioners for winter use. Where in the first place in the ranking was the Neoclima ALASKA (NS / NU - **AHTI) model.
Today, the British company of climate technology Neoclima presented on the Ukrainian market a new, improved version of the Alaska 2.0 (-30°C) heat pump series.
Split system Neoclima Alaska 2.0 - air-to-air heat pump 
Today, the product of a heat pump is little known, since this equipment is relatively new on the market.Many, when it comes to heating a room, apartment or house, come to mind different, more familiar devices, such as:
- boilers (gas, electric, solid fuel);
- household heaters (electric convectors, oil heaters, fan heaters, infrared lamps, etc.);
- finally, just centralized heating;
That is why, in this article, we will tell and get acquainted in more detail with the new, highly efficient inverter air conditioner of the Neoclima Alaska 2.0 (-30 ° С) series of heat pumps.
Inverter split system Neoclima Alaska 2.0 NEW - features
The new Neoclima Alaska has an incredibly high seasonal SEER of approximately 8.6 (A+++) and a SCOP ≈ 5.1 (A+++).Also, one of the main advantages of the Alaska 2.0 NEW version is the heating operation at -30 ° C, which will allow you to heat an apartment or house even in the coldest winters. Such an opportunity can fully replace the types of heating more familiar to users, and also, it will be much more economical and efficient.
Let's take a closer look at what makes the Alaska 2.0 air conditioner the best of its kind:
- Compressor with internal heating six polar.
When the external t°C of the air is below -2°C, and during start-up, the control board determines that the temperature of the compressor itself is lower than required for proper and high-quality functioning. Automatically receives a signal to turn on the internal heating of terms for 1 minute. At the end of the minute, if the compressor temperature has not risen to the required temperature, this process is repeated until the desired result is reached.
Such a system is better than external heating in that:
- heating is directed specifically to the place where it is needed;
- less electricity consumption, as heat is not lost;
- thanks to such a heating system, this process is carried out much faster.
- heating is directed specifically to the place where it is needed;
- Fans of internal and external blocks - inverter.
This feature allows the system to select the optimal fan speed, which, in turn, reduces electricity consumption, as well as reduces noise.
- Double-row heat exchanger, with anti-corrosion, hydrophobic coating GoldFin.
The double-row heat exchanger has an increased heat exchange area, which increases the energy efficiency of the split system. And GoldFin (anti-corrosion coating) extends the life of the equipment and improves heat transfer.
- The outdoor unit has a bottom plate heater.
As you know, the underfloor heating is used to prevent condensation in the outdoor unit from freezing when the air conditioner is operating for heating when the outside temperature is below 0°C.
- Ultra-modern "intelligent" control board.
This board analyzes and scans a number of external factors every second, such as: freon temperature at the exit and entrance, air temperature in the external environment, fan speed, t ° C of the compressor, etc. After that, taking into account all the received indicators, the board adjusts the operation of the system in such a way as to obtain, under certain conditions, the highest possible energy efficiency, while not losing the comfort of the result of the air conditioner.
